Basic Operation
The connected light can be turned ON in two ways:
1. Manually with the push button on the module
2. Remotely through the Touchstone system.
The Front Panel Push button on the Appliance Module allows the user to:
1. Manually turn the connected equipment ON or OFF by pressing the button. This is a toggle switch; if the device is OFF, pressing the button once turns the device ON and vice versa.
2. Adjust the brightness level of the connected lighting by pressing and holding the button. Release the button when the desired level is attained. – This is also a toggle function. The lighting will dim until the minimum level is attained or the button is released. The next time the button is pressed and held, the level will increase until the maximum level is attained or the button is released.
Pairing the Jasco Lamp/Appliance Module