This article applies to the following models: Centralite 3 Series Lamp Module Centralite 3 Series Appliance Module Centralite Azela Lamp Module Centralite Azela Appliance Module Verify that the wall outlet is powered. If the wall outlet is powered by a wall switch, then the wall switch MUST be kept ON…
Defaulting the PEARL Thermostat
To default the thermostat, place the thermostat into programming mode by pressing between the hold button and the fan button. While continuing to hold between the hold button and the fan button, swipe down on the right slider until “01″ is displayed. When the “01” is displayed, it indicates you are in “programming mode.”…
Defaulting the Visonic Carbon Monoxide Alarm (MCT-442 SMA)
Hold down the tamper switch on the bottom of the device. Insert the battery into the sensor. Wait for the RF module’s green LED to light. In order to see the green LED on the circuit board, the cover must be separated from the housing (to expose the circuit board)…
Defaulting a Centralite AZELA Thermostat
To default the thermostat, first remove the thermostat cover and batteries. Place two batteries into the thermostat(the positive terminals will face left) Press and hold the reset button(top left) and the hold button(bottom center). Release the reset button while keeping the hold button depressed. When the screen begins to come…