Before you enter programming mode to program the thermostat, the device needs to be in an “off” state. To turn the thermostat off, press the “Mode” button until “Off” appears on the screen. To enter programming mode: PRESS BETWEEN the hold button and the fan button. Continue to hold and swipe down on the…
TESTING THE THERMOSTAT(PEARL)
Testing Thermostat Operation After completing any necessary configuration make sure the thermostat is in Cool mode by pressing the MODE button until Cool is displayed at the bottom of the screen. Make sure the system is not calling for Cooling by setting the setpoint several degrees above the room temperature.…
THERMOSTAT INSTALLATION(PEARL)
Before you begin installing your thermostat, please be advised that It is always a good practice to consult the owner’s manual for your HVAC system. If necessary, consult an HVAC technician to ensure proper installation. Locating the Thermostat If this is to replace an existing thermostat, just use the existing…
VERIFYING THE THERMOSTAT(PEARL) IS READY TO PAIR
Joining Your Thermostat to the Hub The thermostat needs to be joined to the Hub after installation. The first step in the join process is to make sure the Hub is in it’s join network mode. To do this, navigate to the Add Devices tab in the subscriber portal and…
Mobile App
The Touchstone Mobile app is available in the IOS and Android app stores. Once you’ve downloaded the mobile app, using it is a breeze. Follow the basic steps below to control your home from anywhere. Once you log into the mobile app, the Home Screen greets you with the current…