This article applies to the following models: Centralite 3 Series Lamp Module Centralite 3 Series Appliance Module Centralite Azela Lamp Module Centralite Azela Appliance Module Verify that the wall outlet is powered. If the wall outlet is powered by a wall switch, then the wall switch MUST be kept ON…
Defaulting Centralite AZELA In Wall Light Switch
1. Lift the air-gap switch at the bottom of the rocker to OFF position to power down the device. 2. Hold down the UP button 3. Push In the air-gap switch to ON position to power up the device. 4. Release UP button within 4 seconds after…
Centralite Azela Appliance Module
CentraLite’s Azela Appliance Module has all the features you would expect in an advanced plug-in module. Equipped with high quality electronics, these devices are built tough to last. The Appliance Module comes equipped with a power amplifier for extended range, current sensing technology (for energy management), and a pass-through electrical…
Deleting/Modifying Lights
To delete a light, click Settings on the toolbar to display the settings screen. Click on Lights to display the light settings page. Click the icon next to the camera you want to modify. OR Click the icon next to the light that you want to delete and click yes on the confirmation…
Adding Lights
You can add lights when you activate Touchstone or at a later time. If you want to add a light that was not included with the original Touchstone package, make sure your service provider supports it. To add lights, click Settings on the tool bar to display the settings menu. Click…
Subscriber Portal – Main Page
The Subscriber Portal is the control center for your system. This portal is where you will configure your rules and modes, as well as check system notifications and view saved videos and images. The main page is broken into the following parts: Toolbar: This is the main navigation for the…